DEKI/ENGINE 文档
手册 API 参考
Deki 0.40.1
带可视化编辑器的模块化 C++ 引擎,支持 2D 和 3D
载入中...
搜索中...
未找到
LilyGO T-Display S3 AMOLED

本指南尚未翻译。

A slim device with a bright 1.91 inch AMOLED screen, with or without touch.

LilyGO T-Display S3 AMOLED

规格

项目 详情
处理器 ESP32-S3
CPU 频率 240 MHz
闪存 16 MB
内存 8 MB
屏幕 536 x 240, 1.91 in
颜色格式 RGB565
其他功能 Wi-Fi, Bluetooth

使用这块设备

  1. 在 包管理器 中安装 deki-lilygo-boards。
  2. In the 构建面板, choose LilyGO T-Display S3 AMOLED.
  3. 按 **构建并烧录**。

What is set up for you

Display and touch.

Good to know

  • There is no SD card slot, so your game's assets are always in the flash: about 13 MB of the 16 MB.
  • An AMOLED has no backlight. Brightness is a command to the panel, which Deki sends when the screen turns off and on.
  • On the version without touch, nothing answers and the boot is not slowed by it.
  • If the device does not show up as a port, hold BOOT, press RESET and release BOOT.

Pins

Part Pins
Panel power GPIO 38
Quad SPI bus SCK 47, IO0 18, IO1 7, IO2 48, IO3 5
Display (RM67162) CS 6, reset 17
I2C bus SDA 3, SCL 2
Touch (CST816T) Address 0x15, interrupt 21