DEKI/ENGINE 文档
手册 API 参考
Deki 0.40.1
带可视化编辑器的模块化 C++ 引擎,支持 2D 和 3D
载入中...
搜索中...
未找到
LilyGO T-Deck

本指南尚未翻译。

The first T-Deck: a pocket computer with a keyboard, a trackball, a touch screen and a LoRa radio.

LilyGO T-Deck

规格

项目 详情
处理器 ESP32-S3
CPU 频率 240 MHz
闪存 16 MB
内存 8 MB
屏幕 320 x 240, 2.8 in
颜色格式 RGB565
其他功能 Wi-Fi, Bluetooth, SD card

使用这块设备

  1. 在 包管理器 中安装 deki-lilygo-boards。
  2. In the 构建面板, choose LilyGO T-Deck.
  3. 按 **构建并烧录**。

What is set up for you

Display, backlight, touch, keyboard, trackball, SD card and LoRa. Keys arrive like a desktop keyboard's.

Not set up yet: speaker, microphone and battery reading.

Good to know

  • The trackball moves a pointer and clicks. Set its Mode to Keys in your copy of the boot scene for arrow keys and Enter.
  • Your game's assets are in the flash, so it runs with no SD card. A game too big for the flash can keep them on the card with Storage > Assets: External storage, and then needs one.
  • LoRa is set for Europe: 868.1 MHz, 14 dBm, 1% duty cycle. Change Frequency in your copy for another region, such as 915 MHz in the Americas.
  • GPIO 43 and 44 are the Grove port, left free for you.
  • If dark colours look pink and white looks green, turn on Swap Bytes in the display's settings.
  • If the device does not show up as a port, hold BOOT (the trackball click), press RESET and release BOOT.

Pins

Part Pins
Power switch for display, touch and keyboard GPIO 10
SPI bus SCK 40, MOSI 41, MISO 38
Display (ST7789) DC 11, CS 12, backlight 42
I2C bus SDA 18, SCL 8
Touch (GT911) Address 0x5D, interrupt 16
Keyboard Address 0x55
Trackball Up 3, down 15, left 1, right 2, click 0
SD card CS 39
Grove port GPIO 43, 44
LoRa (SX1262) CS 9, BUSY 13, RESET 17, DIO1 45