DEKI/ENGINE 문서
매뉴얼 API 참조
Deki 0.40.1
비주얼 에디터가 있는 2D·3D 모듈식 C++ 엔진
로딩중...
검색중...
일치하는것 없음
LilyGO T-Deck Plus

이 가이드는 아직 번역되지 않았습니다.

A pocket computer with a keyboard, a trackball, a touch screen, GPS and a LoRa radio.

LilyGO T-Deck Plus

사양

항목 내용
프로세서 ESP32-S3
CPU 속도 240 MHz
플래시 16 MB
RAM 8 MB
화면 320 x 240, 2.8 in
색상 형식 RGB565
기타 Wi-Fi, Bluetooth, SD card

이 디바이스 사용하기

  1. 패키지 관리자 에서 deki-lilygo-boards 를 설치합니다.
  2. In the 빌드 패널, choose LilyGO T-Deck Plus.
  3. 빌드 후 플래시 를 누릅니다.

What is set up for you

Display, backlight, touch, keyboard, trackball, SD card, GPS and LoRa. Keys arrive like a desktop keyboard's.

Not set up yet: speaker, microphone and battery reading.

Good to know

  • The trackball moves a pointer and clicks. Set its Mode to Keys in your copy of the boot scene for arrow keys and Enter.
  • Your game's assets are in the flash, so it runs with no SD card. A game too big for the flash can keep them on the card with Storage > Assets: External storage, and then needs one.
  • LoRa is set for Europe: 868.1 MHz, 14 dBm, 1% duty cycle. Change Frequency in your copy for another region, such as 915 MHz in the Americas.
  • If dark colours look pink and white looks green, turn on Swap Bytes in the display's settings.
  • If the device does not show up as a port, hold BOOT (the trackball click), press RESET and release BOOT.

Pins

Part Pins
Power switch for display, touch and keyboard GPIO 10
SPI bus SCK 40, MOSI 41, MISO 38
Display (ST7789) DC 11, CS 12, backlight 42
I2C bus SDA 18, SCL 8
Touch (GT911) Address 0x5D, interrupt 16
Keyboard Address 0x55
Trackball Up 3, down 15, left 1, right 2, click 0
SD card CS 39
GPS RX 44, TX 43
LoRa (SX1262) CS 9, BUSY 13, RESET 17, DIO1 45