このガイドはまだ翻訳されていません。
A slim device with a bright 1.91 inch AMOLED screen, with or without touch.
LilyGO T-Display S3 AMOLED
仕様
| 項目 | 内容 |
| プロセッサ | ESP32-S3 |
| CPU 速度 | 240 MHz |
| フラッシュ | 16 MB |
| RAM | 8 MB |
| 画面 | 536 x 240, 1.91 in |
| カラーフォーマット | RGB565 |
| その他 | Wi-Fi, Bluetooth |
このデバイスを使う
- パッケージマネージャー で deki-lilygo-boards をインストールします。
- In the ビルドパネル, choose LilyGO T-Display S3 AMOLED.
- ビルドして書き込み を押します。
What is set up for you
Display and touch.
Good to know
- There is no SD card slot, so your game's assets are always in the flash: about 13 MB of the 16 MB.
- An AMOLED has no backlight. Brightness is a command to the panel, which Deki sends when the screen turns off and on.
- On the version without touch, nothing answers and the boot is not slowed by it.
- If the device does not show up as a port, hold BOOT, press RESET and release BOOT.
Pins
| Part | Pins |
| Panel power | GPIO 38 |
| Quad SPI bus | SCK 47, IO0 18, IO1 7, IO2 48, IO3 5 |
| Display (RM67162) | CS 6, reset 17 |
| I2C bus | SDA 3, SCL 2 |
| Touch (CST816T) | Address 0x15, interrupt 21 |