DEKI/ENGINE docs
manual api reference
Deki 0.40.1
Modular C++ engine with a visual editor, for 2D and 3D
Loading...
Searching...
No Matches
LilyGO T-Display S3 AMOLED

A slim device with a bright 1.91 inch AMOLED screen, with or without touch.

LilyGO T-Display S3 AMOLED

Specifications

Part Detail
Processor ESP32-S3
CPU speed 240 MHz
Flash 16 MB
RAM 8 MB
Screen 536 x 240, 1.91 in
Colour format RGB565
Also has Wi-Fi, Bluetooth

Use this device

  1. In the Package Manager, install deki-lilygo-boards.
  2. In the Build Panel, choose LilyGO T-Display S3 AMOLED.
  3. Press Build & Flash.

What is set up for you

Display and touch.

Good to know

  • There is no SD card slot, so your game's assets are always in the flash: about 13 MB of the 16 MB.
  • An AMOLED has no backlight. Brightness is a command to the panel, which Deki sends when the screen turns off and on.
  • On the version without touch, nothing answers and the boot is not slowed by it.
  • If the device does not show up as a port, hold BOOT, press RESET and release BOOT.

Pins

Part Pins
Panel power GPIO 38
Quad SPI bus SCK 47, IO0 18, IO1 7, IO2 48, IO3 5
Display (RM67162) CS 6, reset 17
I2C bus SDA 3, SCL 2
Touch (CST816T) Address 0x15, interrupt 21